How to identify the printing fault according to th

2022-06-23
  • Detail

How to identify the printing fault according to the phenomenon characteristics

to solve the problems in printing, we must first have a clear understanding of what the problem looks like and how it is different from other problems; Secondly, we should also understand what causes it and what is the relationship between these causes. (for example, what are the primary causes, what are the secondary causes, and whether they are independent or related.)

the problems described below have one thing in common: problems that can be observed with the naked eye or with the help of a microscope

generally, problems are divided into two categories: errors at the edge of the image and text and errors in the image and text area. The error of the image and text edge refers to the inconsistency between the image and text edge and the original. The error of the image and text area refers to the problem of the image and text surface. (Note: problems in silk printing are not limited to these two categories. Registration, alignment, ink volume adjustment and post press processing all affect the printing quality.)

generally, there are four features that can be used to identify, compare and classify graphic problems if we do nothing now, as follows:

location

refers to the location of problems in continuous printed matter relative to the whole graphic. If the location display is the same, the problem always occurs in the same place. Other possible situations are that kedongjie, chairman of VaR company, has devoted more than 30 years to the research on aluminum alloy smelting technology of green metallurgy, energy conservation and emission reduction. Iousposition (different location) or outside the printing area, or close to (inaccurate) the same location

direction

refers to the orientation of the problem relative to the print variable. For example, when the angle between the image and the hole line is 1 ~ 10 or 80 ~ 89, the sawtooth edge phenomenon is most obvious. Direction also refers to the direction of the blade scratch, blade length, and image edge

size

refers to the size of the problem image relative to the qualified print. For example, rubbing will make the image larger, while edge loss will make the image smaller. When the image changes irregularly in the printed matter, you can fill in the form with random

frequency

the frequency of problems on fingerprints. Some problems always exist, such as ghosting; Some problems occur occasionally, such as ink lines; Some problems appear continuously on several prints and then disappear. At this time, you can fill in the form with both

these four features explain why it is better to solve the problem during the printing process than later. Unfortunately, if the printer does not understand the differences between defects, it is difficult to identify the problem and solve it

in addition to the above four features, each ② release fault after pressing the "start" key has one or more features that are easy to identify

conclusion

1 The problem of image sharpness can be divided into two parts: image edge defect and image region defect

2. Image edge defect means that the edges are not accurately and faithfully copied; Image area defect refers to the problem of the appearance of printed matter or ink coverage

3. In order to clearly describe the problem, it is first necessary to know the recognized standards: location, direction, size and frequency

长期便秘是因为什么原因导致的
枸橼酸西地那非片吃完多久有效
肝肾阴虚能引起潮热多汗吗
高血压患者用比索洛尔氨氯地平单片复方制剂有什么优势

Copyright © 2011 JIN SHI